Prepared Houses With Key Prices

The establishment of a home from the SIP of panels is considered to be one of the most budgetary ways to invest in comfortable housing. The building process takes a minimum amount of time. As is the case with any other construction technologies, the construction of the SIP house is taking place in several stages.

All components of the future house are produced in a factory manner and transported to the construction site. Only carcasses and other necessary work are collected locally.

Fundation

A ready house from the SIP of panels underneath the key does not need a costly, massive foundation. On the basis of the design and type of ground, the construction can be based on tape, tetanus or iron-bedton bases (monolite and prefabricated). The most budgeted option is the underlying foundation. A concrete cushion is used as a foundation in a wet, mobile and prosperous soil.

Carcas

The carcasing of the SIP house under the key may be collected at any time of the year. The floor closure panels shall be installed and reinforced first. The wall panels are then installed. The first stoves shall be placed at right angles to each other, thus allowing the perimeter of the walls to be given the necessary strength. Subsequent panels are connected in the way of sipp-paz, attaching them to each other by means of special nails or conventional smears. Inter-community partitions are also installed.

The closure of the second floor shall be in the same way as the closure of the first floor, with the difference that the base for it is the carcass of the walls of the first floor. The closing stage of the assembly is the installation of the roof for which any blood material can be used, as well as the sealing of the house. All technological paths exceeding 3 mm are folded with polyurethane cells. The window and door designs are then installed.