How To Build A Brushe
This article will tell us how to get the house out of the brushe with its hands. The wall bruise is a profiled wrench with cuts on the corners. The public width of the bare for the construction of the outer walls is 14 to 16 cm. That's enough. If the house is in a climatic zone whose temperature is not below 30 degrees winter. If it's colder, it's necessary to build at least 18 cm wide from the brushe.
Partitions can be constructed of braces of a width of about 10 to 12 cm, but the height shall be the same as that of the outer walls. Eagle to take the thickness of the walls of the 15 cm bruise, his thermal insulation will be at least 20 cm in the house.
The height of the braces is better taken because the stitches between the braces are the most vulnerable to rainfall and the least save heat. The logic is, the smaller the stitches, the warmer the house.
It is recommended that the stitches be carefully configured and bleeded with olive or oily paint.
Why is the house of the bras better at home from the womb? First, it's a higher speed of construction and simple building technology. Bros is a ready-made wreath that only needs to be laid and fixed with others. Secondly, the walls from the brushes are not flowing, so once the foundation is built, the walls can be built immediately. The virus is more costly than the log.
The negative character of the brushe is one thing. There is no longitudinal puzzle in the bruising wall, making it more insulated (even with good design). The weakest place in the walls of the brushe is the corner.
Construction of brushe walls on hand
This brush wall technology is not very different from the braids. The only difference is, if the brace is spontaneous, it is connected to the penetrated sex board. At first, the angles shall be combined with the semi-derive method. Further rows are connected with vertical handrails.
In order to keep the wall vertical, they shall be combined with vertical thugs (height 20-25 cm and diameter around 3 mm). Once the bruise is placed on the package, it will be drilled into a hole below the next fist from half the height of the nugel. There's gonna be a hole like this in the brushe.
Construction of front bars
The construction of the brushe wall " attach " is a simple way. The bruises are interchangeably placed on each other, the seams are tied together and the angles are fixed with metal brackets.
